2016 John Deere 635F-35'

$30,000.00


New/Used
Used
Usage
Hours
Availability
In Stock
Location
Alderman's Incorporated
Primary Color
GREEN
Trim Color
BLACK
VIN
1H00635FJG0785254
Stock #
35494
Title
Clean
Condition
Good
Year
2016
Manufacturer
John Deere
Model
635F-35'

Overview

Dealer Insights

Tag #35494 John Deere 635F floating cutter bar header, plastic tines, 3 inch knife, like new condition, $30,000

Description

The 635 Flex Cutting Platform provides a full 35-foot cutting width, the HydraFlex™ float system, and an epicyclic knife drive.

Features
  • Cutting - ; Cutterbar knife guards manufactured for high wear ; HydraFlex™ cutterbar designed to eliminate grain loss ; 600F Series Cutterbar Platforms provide lowest cut height ; Dura-Twin™ bolt-on knife sections made for long life ; Epicyclic knife drive increases drive capacity ; Adjust knife guards quickly for knife section clearance ; Safe and damage-free storage for a spare knife ; 600 Flex Header height sensors for rigid mode
  • Drives - ; Epicyclic knife drive increases drive capacity ; Less reel, mounting, and drive parts
  • Feeding - ; Large-diameter auger provides greater crop material handling ; Perma-Glide™ floating divider points (HydraFlex™ models) ; In-line center auger finger pattern improves crop sweep from auger to feederhouse drum ; 600 Series composite fingers provide excellent wear characteristics ; Third floor stripper attachment ; Front floor stripper attachment for 600F Platforms
  • Reel - ; Less reel, mounting, and drive parts ; Low-profile pickup reel design allows gentle feeding of crops to reduce shatter loss ; Extended range for adjusting reel-lift cylinder height ; 600 Flex Header height sensors for rigid mode ; Reels for 600F Cutting Platforms ; Reel position resume attachment
  • Serviceability - ; Enhanced single-point hydraulic and electrical hookup saves time ; Perma-Glide™ floating divider points (HydraFlex™ models) ; Easy adjustments reduce downtime ; Adjust knife guards quickly for knife section clearance ; Safe and damage-free storage for a spare knife ; Mounted stubble lights enable operator to see height of cut at night
  • Suspension System - ; HydraFlex™ float system improves operator control
Dimensions
  • Cutterbar type: Type - Knife system with in-line gearbox 102 mm 4 in. ; Cutterbar angle - 10 degree (angle) ; Cutterbar length, ft. (m) - 10.7 m 35 ft ; Flex cutterbar float range, in. (mm) - 152 mm 6 in. ; Tilt adjustment - 17 (located on feederhouse) degree (angle) ; Knife sections - Heavy-duty, over-serrated; Guards - Forged steel, heat-treated; Backshaft speed, rpm - 490 rpm; Knife speed, cycles/min. - 520 cycles/min
  • Dimensions: Cutting width, ft. (m) - 10.7 m 35 ft ; Gathering width, ft. (m) - 10.7 m 35.1 ft; Overall width, ft. (m) - 11.2 m 36.7 ft; Approximate weight, lb. (kg) - 3,003 kg 6,620 lb
  • Hydraulics: Reel drive system pressure, psi (kPa) - 14,000 (+/- 1,000) kPa 2,000 (+/- 150) psi ; Reel fore/aft stroke, in. (mm) - 359 mm 14.1 in.
  • Reel: Number for slats - 6 ; Diameter, in. (mm) - 1,067 mm 42 in. ; Height control - Hydraulic ; Speed control - Hydraulic; Operating speeds, rpm - 6-44 rpm
General Information
  • Auger: Diameter, in. (mm) - 660 mm 26 in. ; Operating speed, rpm - Slow down 135, 152 rpm Speedup 170 rpm